Acid-Catalyzed Activation and Condensation of the =C5H Bond of Furfural on Aldehydes, an Entry Point to Biobased Monomers.

Furfural is an industrially relevant biobased chemical platform. Unlike classical furan, or C-alkylated furans, which have been previously described in the current literature, the =C5H bond of furfural is unreactive. As a result, on a large scale, C=C and C=O bond hydrogenation/hydrogenolysis is mainly performed, with furfuryl alcohol and methyl tetrahydrofuran being the two main downstream chemicals. Here, we show that the derivatization of the -CHO group of furfural restores the reactivity of its =C5H bond, thus permitting its double condensation on various alkyl aldehydes. Overcoming the recalcitrance of the =C5H bond of furfural has opened an access to a biobased monomer, whose potential have been investigated in the fabrication of renewably-sourced poly(silylether). By means of a combined theoretical-experimental study, a reactivity scale for furfural and its protected derivatives against carbonylated compounds has been established using an electrophilicity descriptor, a means to predict the molecular diversity and complexity this pathway may support, and also to de-risk any project related to this topic. Finally, by using performance criteria for industrial operations in the field of fuels and commodities, we discussed the industrial potential of this work in terms of cost, E-factor, reactor productivity and catalyst consumption.

Metal-Free Selective Synthesis of α,ß-Unsaturated Aldehydes from Alkenes and Formaldehyde Catalyzed by Dimethylamine.

α,ß-Unsaturated aldehydes are important building blocks for the synthesis of a wide range of chemicals, including polymers. The synthesis of these molecules from cheap feedstocks such as alkenes remains a scientific challenge, mainly due to the low reactivity of alkenes. Here we report a selective and metal-free access to α,ß-unsaturated aldehydes from alkenes with formaldehyde. This reaction is catalyzed by dimethylamine and affords α,ß-unsaturated aldehydes in yields of up to 80 %. By combining Density Functional Theory (DFT) calculations and experiments, we elucidate the reaction mechanism which is based on a cascade of hydride transfer, hydrolysis and aldolization reactions. The reaction can be performed under very mild conditions (30-50 °C), in a theoretically 100 % carbon-economical fashion, with water as the only by-product. The reaction was successfully applied to non-activated linear 1-alkenes, thus opening an access to industrially relevant α,ß-unsaturated aldehydes from cheap and widely abundant chemicals at large scale.

Catalytic synthesis of renewable phenol derivatives from biobased furanic derivatives.

Here, we study a sequence Diels-Alder/aromatization reaction between biobased furanic derivatives and alkynes, paving the way to renewable phenols. Guided by DFT calculations, we revealed that, in the case of dimethylfuran, the methyl group can migrate during the aromatization step, making this substrate also eligible to access renewable phenols. This reaction has been then successfully transposed to furfural and furfuryl alcohol, allowing molecular diversity and complexity to be created on phenol ring starting from two cheap biobased furanic derivatives available on large scale.

Selective Acid-Catalyzed Hydroarylation of Nonactivated Alkenes with Aniline Assisted by Hexafluoroisopropanol.

The catalytic hydroarylation of nonactivated alkenes with aniline is a reaction of high interest, aiming at providing C-functionalized aniline derivatives that are important precursors for the fabrication of polyurethanes. However, this reaction remains a longstanding goal of catalysis, as it requires one to simultaneously address two important goals: (1) the very low reactivity of nonactivated alkenes and (2) control of the hydroarylation/hydroamination selectivity. As a result, the hydroarylation of aniline is mostly restricted to activated alkenes (i.e., featuring ring strain, conjugation, or activation with electron-donating or -withdrawing groups). Here we show that the combination of bismuth triflate and hexafluoroisopropanol (HFIP) leads to the formation of highly active catalytic species capable of promoting the hydroarylation of various nonactivated alkenes, such as 1-octene, 1-heptene, and 1-undecene, among others, with aniline with high selectivity (71-92%). Through a combined experimental and computational investigation, we propose a reaction pathway where HFIP stabilizes the rate-determining transition state through a H-bond interaction with the triflate anion, thus assisting the acid catalyst in the hydroarylation of nonactivated alkenes. From a practical point of view, this work opens a catalytic access to C-functionalized aniline derivatives from two cheap and abundant feedstocks in a 100% atom-economical fashion.

Conversion of Ammonia to Hydrazine Induced by High-Frequency Ultrasound.

Hydrazine is a chemical of utmost importance in our society, either for organic synthesis or energy use. The direct conversion of NH3 to hydrazine is highly appealing, but it remains a very difficult task because the degradation of hydrazine is thermodynamically more feasible than the cleavage of the N-H bond of NH3 . As a result, any catalyst capable of activating NH3 will thus unavoidably decompose N2 H4 . Here we show that cavitation bubbles, created by ultrasonic irradiation of aqueous NH3 at a high frequency, act as microreactors to activate and convert NH3 to NH species, without assistance of any catalyst, yielding hydrazine at the bubble-liquid interface. The compartmentation of in-situ-produced hydrazine in the bulk solution, which is maintained close to 30 °C, advantageously prevents its thermal degradation, a recurrent problem faced by previous technologies. This work also points towards a path to scavenge . OH radicals by adjusting the NH3 concentration.

A Combined Experimental-Theoretical Study on Diels-Alder Reaction with Bio-Based Furfural: Towards Renewable Aromatics.

The synthesis of relevant renewable aromatics from bio-based furfural derivatives and cheap alkenes is carried out by using a Diels-Alder/aromatization sequence. The prediction and the control of the ortho/meta selectivity in the Diels-Alder step is an important issue to pave the way to a wide range of renewable aromatics, but it remains a challenging task. A combined experimental-theoretical approach reveals that, as a general trend, ortho and meta cycloadducts are the kinetic and thermodynamic products, respectively. The nature of substituents, both on the dienes and dienophiles, significantly impacts the feasibility of the reaction, through a modulation on the nucleo- and electrophilicity of the reagents, as well as the ortho/meta ratio. We show that the ortho/meta selectivity at the reaction equilibrium stems from a subtle interplay between charge interactions, favoring the ortho products, and steric interactions, favoring the meta isomers. This work also points towards a path to optimize the aromatization step.

One-pot synthesis of isosorbide from cellulose or lignocellulosic biomass: a challenge?

The catalytic conversion of (ligno)cellulose is currently subject of intense research. Isosorbide is one of the interesting products that can be produced from (ligno)cellulose as it can be used for the synthesis of a wide range of pharmaceuticals, chemicals, and polymers. Isosorbide is obtained after the hydrolysis of cellulose to glucose, followed by the hydrogenation of glucose to sorbitol that is then dehydrated to isosorbide. The one-pot process requires an acid and a hydrogenation catalyst. Several parameters are of importance during the direct conversion of (ligno)cellulose such as the acidity, the crystallinity and the particle size of cellulose as well as the nature of the feedstocks. This review highlights all these parameters and all the strategies employed to produce isosorbide from (ligno)cellulose in a one-pot process.

Selective radical depolymerization of cellulose to glucose induced by high frequency ultrasound.

The depolymerization of cellulose to glucose is a challenging reaction and often constitutes a scientific obstacle in the synthesis of downstream bio-based products. Here, we show that cellulose can be selectively depolymerized to glucose by ultrasonic irradiation in water at a high frequency (525 kHz). The concept of this work is based on the generation of H˙ and ˙OH radicals, formed by homolytic dissociation of water inside the cavitation bubbles, which induce the cleavage of the glycosidic bonds. The transfer of radicals on the cellulose particle surfaces prevents the side degradation of released glucose into the bulk solution, allowing maintaining the selectivity to glucose close to 100%. This work is distinguished from previous technologies in that (i) no catalyst is needed, (ii) no external source of heating is required, and (iii) the complete depolymerization of cellulose is achieved in a selective fashion. The addition of specific radical scavengers coupled to different gaseous atmospheres and ˙OH radical dosimetry experiments suggested that H˙ radicals are more likely to be responsible for the depolymerisation of cellulose.

Synergistic Effect of High-Frequency Ultrasound with Cupric Oxide Catalyst Resulting in a Selectivity Switch in Glucose Oxidation under Argon.

We report here, and rationalize, a synergistic effect between a non-noble metal oxide catalyst (CuO) and high-frequency ultrasound (HFUS) on glucose oxidation. While CuO and HFUS are able to independently oxidize glucose to gluconic acid, the combination of CuO with HFUS led to a dramatic change of the reaction selectivity, with glucuronic acid being formed as the major product. By means of density functional theory (DFT) calculations, we show that, under ultrasonic irradiation of water at 550 kHz, the surface lattice oxygen of a CuO catalyst traps H· radicals stemming from the sonolysis of water, making the ring-opening of glucose energetically unfavorable and leaving a high coverage of ·OH radical on the CuO surface, which selectively oxidizes glucose to glucuronic acid. This work also points toward a path to optimize the size of the catalyst particle for an ultrasonic frequency that minimizes the damage to the catalyst, resulting in its successful reuse.

Catalyst-Free Synthesis of Alkylpolyglycosides Induced by High-Frequency Ultrasound.

The irradiation of concentrated feeds of carbohydrates in alcoholic solution by high-frequency ultrasound (550 kHz) induces the formation of alkylpolyglycosides (APGs). This work is distinct from previous reports in that it does not involve any (bio)catalyst or activating agent, it takes place at only 40 °C, thus avoiding degradation of carbohydrates, and it selectively yields APGs with a degree of polymerization in a window of 2-7, an important limitation of the popular Fischer glycosylation. This ultrasound-based technology proved successful with a range of different valuable carbohydrates and alkyl alcohols. The elucidation of the structure of all the produced glycosides strongly suggests that 1,6-anhydrosugars formed in situ are key intermediate species.

Synthesis of Renewable meta-Xylylenediamine from Biomass-Derived Furfural.

We report the synthesis of biomass-derived functionalized aromatic chemicals from furfural, a building block nowadays available in large scale from low-cost biomass. The scientific strategy relies on a Diels-Alder/aromatization sequence. By controlling the rate of each step, it was possible to produce exclusively the meta aromatic isomer. In particular, through this route, we describe the synthesis of renewably sourced meta-xylylenediamine (MXD). Transposition of this work to other furfural-derived chemicals is also discussed and reveals that functionalized biomass-derived aromatics (benzaldehyde, benzylamine, etc.) can be potentially produced, according to this route.

Mechanocatalytic Depolymerization of Cellulose With Perfluorinated Sulfonic Acid Ionomers.

Here, we investigated that the mechanocatalytic depolymerization of cellulose in the presence of Aquivion, a sulfonated perfluorinated ionomer. Under optimized conditions, yields of water soluble sugars of 90-97% were obtained using Aquivion PW98 and PW66, respectively, as a solid acid catalyst. The detailed characterization of the water soluble fraction revealed (i) the selective formation of oligosaccharides with a DP up to 11 and (ii) that depolymerization and reversion reactions concomitantly occurred during the mechanocatalytic process, although the first largely predominated. More importantly, we discussed on the critical role of water contained in Aquivion and cellulose on the efficiency of the mechanocatalytic process.

Polar aprotic solvent-water mixture as the medium for catalytic production of hydroxymethylfurfural (HMF) from bread waste.

Valorisation of bread waste for hydroxymethylfurfural (HMF) synthesis was examined in dimethyl sulfoxide (DMSO)-, tetrahydrofuran (THF)-, acetonitrile (ACN)-, and acetone-water (1:1v/v), under heating at 140°C with SnCl4 as the catalyst. The overall rate of the process was the fastest in ACN/H2O and acetone/H2O, followed by DMSO/H2O and THF/H2O due to the rate-limiting glucose isomerisation. However, the formation of levulinic acid (via rehydration) and humins (via polymerisation) was more significant in ACN/H2O and acetone/H2O. The constant HMF maxima (26-27mol%) in ACN/H2O, acetone/H2O, and DMSO/H2O indicated that the rates of desirable reactions (starch hydrolysis, glucose isomerisation, and fructose dehydration) relative to undesirable pathways (HMF rehydration and polymerisation) were comparable among these mediums. They also demonstrated higher selectivity towards HMF production over the side reactions than THF/H2O. This study differentiated the effects of polar aprotic solvent-water mediums on simultaneous pathways during biomass conversion.

Conversion of Cellulose into Amphiphilic Alkyl Glycosides Catalyzed by Aquivion, a Perfluorosulfonic Acid Polymer.

The perfluorosulfonic acid (PFSA) Aquivion PW98 is an amphiphilic solid superacid which is shown to catalyze the conversion of cellulose into amphiphilic alkyl glycosides (AAGs) in 85 % yield (with 97 % selectivity). The process involves a mechanocatalytic depolymerization of cellulose followed by a direct glycosylation with n-dodecanol. In comparison to H2 SO4 and solid acid catalysts commonly employed in cellulose processing, Aquivion PFSA PW98 is not only recyclable but also exhibits superior catalytic performances in terms of yield, selectivity, and reactor productivity.

Carbon Dioxide as a Traceless Caramelization Promotor: Preparation of Prebiotic Difructose Dianhydrides (DFAs)-Enriched Caramels from d-Fructose.

Activation of a concentrated solution of d-fructose with carbonic acid, generated from carbon dioxide, induces the formation of difructose dianhydrides (DFAs) and their glycosylated derivatives (glycosyl-DFAs), a family of prebiotic oligosaccharides. Under optimized conditions, up to 70% of the active DFA species were obtained from a highly concentrated solution of fructose, avoiding the filtration step and contamination risk associated with the current procedures that employ heterogeneous catalysis with acid ion-exchange resins. The optimized CO2-promoted preparation of DFA-enriched caramel described here has been already successfully scaled up to 150 kg of d-fructose for nutritional studies, showing that implementation of this process is possible at a larger scale.

Acid-Assisted Ball Milling of Cellulose as an Efficient Pretreatment Process for the Production of Butyl Glycosides.

Ball milling of cellulose in the presence of a catalytic amount of H2SO4 was found to be a promising pre-treatment process to produce butyl glycosides in high yields. Conversely to the case of water, n-butanol has only a slight effect on the recrystallization of ball-milled cellulose. As a result, thorough depolymerization of cellulose prior the glycosylation step is no longer required, which is a pivotal aspect with respect to energy consumption. This process was successfully transposed to wheat straw from which butyl glycosides and xylosides were produced in good yields. Butyl glycosides and xylosides are important chemicals as they can be used as hydrotropes but also as intermediates in the production of valuable amphiphilic alkyl glycosides.

Selective Hydrogenation of Furfural to Furfuryl Alcohol in the Presence of a Recyclable Cobalt/SBA-15 Catalyst.

The hydrogenation of furfural to furfuryl alcohol was performed in the presence of a Co/SBA-15 catalyst. High selectivity (96 %) at a conversion higher than 95 % is reported over this catalytic system. As the conversion of furfural to furfuryl alcohol occurs over metallic Co sites, the effect of reduction temperature, H2 pressure, and reaction temperature were studied. Optimum reaction conditions were: 150 °C, 1.5 h, 2.0 MPa of H2 . The catalyst was recyclable, and furfuryl alcohol was recovered with a purity higher than 90 %. The effect of the solvent concentration was also studied. With a minimum of 50 wt % of solvent, the selectivity to furfuryl alcohol and the conversion of furfural remained high (both over 80 %). Likewise, the activity of the catalyst is maintained even in pure furfural, which confirms the real potential of the proposed catalytic system. This catalyst was also used in the hydrogenation of levulinic acid to produce γ-valerolactone selectively.

Catalytic dehydration of carbohydrates suspended in organic solvents promoted by AlCl3 /SiO2 coated with choline chloride.

We show that the coating of choline chloride on silica-supported AlCl3 allows the dehydration of carbohydrates to successfully proceed in low boiling point organic solvents. The concept is based on the in situ formation of a deep eutectic liquid phase on the catalyst surface, thus facilitating the interaction between the solid catalyst and insoluble carbohydrate.

Sonochemistry: what potential for conversion of lignocellulosic biomass into platform chemicals?

This Review focuses on the use of ultrasound to produce chemicals from lignocellulosic biomass. However, the question about the potential of sonochemistry for valorization/conversion of lignocellulosic biomass into added-value chemicals is rather conceptual. Until now, this technology has been mainly used for the production of low-value chemicals such as biodiesel or as simple method for pretreatment or extraction. According to preliminary studies reported in literature, access to added-value chemicals can be easily and sometimes solely obtained by the use of ultrasound. The design of sonochemical parameters offers many opportunities to develop new eco-friendly and efficient processes. The goal of this Review is to understand why the use of ultrasound is focused rather on pretreatment or extraction of lignocellulosic biomass rather than on the production of chemicals and to understand, through the reported examples, which directions need to be followed to favor strategies based on ultrasound-assisted production of chemicals from lignocellulosic biomass. We believe that ultrasound-assisted processes represent an innovative approach and will create a growing interest in academia but also in the industry in the near future. Based on the examples reported in the literature, we critically discuss how sonochemistry could offer new strategies and give rise to new results in lignocellulosic biomass valorization.

Palladium/Carbon dioxide cooperative catalysis for the production of diketone derivatives from carbohydrates.

The one-pot production of industrially valuable diketone derivatives from carbohydrates is achieved through a bifunctional catalytic process. In particular, Pd/C-catalyzed hydrogenation of HMF in water and under CO2 affords 1-hydroxypentane-2,5-dione with up to 77% yield. The process is also eligible starting from fructose and inulin, affording 1-hydroxyhexane-2,5-dione with 36% and 15% yield, respectively. The key of the process is reversible in situ formation of carbonic acid, which is capable of assisting Pd/C during the hydrogenation reaction by promoting the dehydration of carbohydrates and the ring-opening of furanic intermediates. Interestingly, by changing the reaction medium from H2 O to a H2 O/THF mixture (1:9), it is possible to switch the selectivity of the reaction and to produce 2,5-hexanadione with 83% yield. Within the framework of sustainable chemistry, reactions presented in this report show 100% carbon economy, involve CO2 to generate acidity, require water as a solvent, and are conducted under rather low hydrogen pressures (10 bar).